|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
 ;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
 ;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
 ;
I received the Manual in a timely manner and it was exactly what I needed.
This is a perfect copy of the Service Manual, The quality is great. I am very
happy. Thank you
 ;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
NO SOUND (PICTURE OK) (No AM Sound) NO Check the Audio signal of pin25 of IC604 normal (No NICAM or FM Sound) Check whether Sound system of MENU OSD is correct or not Incorrect
Check/Replace IC604
Yes
Correct
Set correct Sound system
Check the Audio signal of pin44 of ICN01 normal
Yes
Is the SIF signal of pin24 of IC604 normal
NO
NO Yes
Check/Replace IC101
Check AM line
Are the Audio signal of pin24, 25 of ICN01 normal?
NO
Yes
Check/Replace XN01, ICN01
Are the Audio signal of pin1, 9 of IC601 normal
NO
Yes NO
Check RO LO lines.
Check the voltage of Q601 Base.
0V Check/Replace Q601, IC101, Q602, D601, D602, R612, R614 Are the Audio signal of pin4, 6 of IC601 normal? NO
Yes
Check the voltage of pin7 of IC601
Check/Replace C614, C615, D603, D604, Speaker Yes Check/Replace IC601
NO
Check/Replace F802, D814, L801
|
|
 |
> |
|